Listing Category Search Page | NSF International (2024)

[1] Colors: Dark Green Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 50 Maximum thinner: None Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90 seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F Special Comments: Preheat part to 425° - 488° F before application of powder.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 60 Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at 400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F[4] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 60 Maximum Thinner: None Final Cure Time and Temperature: 25 minutes at 425° F[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use.

[1] Colors: Dark Green Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 50 Maximum thinner: None Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90 seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F Special Comments: Preheat part to 425° - 488° F before application of powder.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 60 Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at 400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F[4] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 60 Maximum Thinner: None Final Cure Time and Temperature: 25 minutes at 425° F[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use.

[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 60 Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at 400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F[3] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L. for pump end use.[4] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 60 Maximum Thinner: None Final Cure Time and Temperature: 25 minutes at 425° F[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use.

[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 60 Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at 400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F[4] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 60 Maximum Thinner: None Final Cure Time and Temperature: 25 minutes at 425° F

[1] Colors: Dark Green Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 50 Maximum thinner: None Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90 seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F Special Comments: Preheat part to 425° - 488° F before application of powder.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 60 Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at 400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F[4] Number of Coats: 1 Sequence of Coats: N/A Maximum Field Use Dry Film Thickness (in mils): 60 Maximum Thinner: None Final Cure Time and Temperature: 25 minutes at 425° F[5] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L for pump end use.

[1] Certified for use in municipal wells in conjunction with a submersible pump. Not Certified for residential use.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[2] Certified for mechanical seals for use with pump shafts ranging from 1" - 12" in diameter. Certified for equivalent metric sizes.[3] Certified for use as a packing material in pumps with shaft diameters >= 0.625".[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Colors: Blue, White Number of coats: 3 Maximum field use dry film thickness (in mils): 45 (15 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume[2] Colors: White Number of coats: 1-3 Maximum field use dry film thickness (in mils): 240 (80 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume. Minimum mil thickness is 1 coat at 80 mils.

[1] Colors: Blue, White Number of coats: 3 Maximum field use dry film thickness (in mils): 45 (15 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume

[1] Colors: Blue, White Number of coats: 3 Maximum field use dry film thickness (in mils): 45 (15 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume[2] Colors: White Number of coats: 1-3 Maximum field use dry film thickness (in mils): 240 (80 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume. Minimum mil thickness is 1 coat at 80 mils.

[1] Colors: Blue, White Number of coats: 3 Maximum field use dry film thickness (in mils): 45 (15 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume

[1] Colors: Blue, White Number of coats: 3 Maximum field use dry film thickness (in mils): 45 (15 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume[2] Colors: White Number of coats: 1-3 Maximum field use dry film thickness (in mils): 240 (80 mils/coat) Recoat cure time and temperature: 6 hours at 77°F Final cure time and temperature: 7 days at 77°F Special Comments: Mix ratio of Part A:B is 2:1 by volume. Minimum mil thickness is 1 coat at 80 mils.

[1] The exposed surface area of each sealant in a household distribution system should not exceed 1.3 sq. cm/L or .2 sq. in/L.

[1] Coating Notes: Color: Gray Number of Coats: 2 - 4 Maximum Field Use Dry Thickness (in mils): 2000 mils Recoat Cure Time and Temperature: 1 hour at 75°F Final Cure Time/Temperature: 7 days @ 75°F Special Comments: Mix ratio is 4 quarts of water to one 60 lb bag of Cemtec Silatec PW. Ensure proper surface preparation guidelines are followed prior to installation.

[1] Coating Notes: Color: Gray Number of Coats: 2 - 4 Maximum Field Use Dry Thickness (in mils): 2000 mils Recoat Cure Time and Temperature: 1 hour at 75°F Final Cure Time/Temperature: 7 days @ 75°F Special Comments: Mix ratio is 4 quarts of water to one 60 lb bag of Cemtec Silatec PW. Ensure proper surface preparation guidelines are followed prior to installation.

[1] Coating Notes: Color: Gray Number of Coats: 2 - 4 Maximum Field Use Dry Thickness (in mils): 2000 mils Recoat Cure Time and Temperature: 1 hour at 75°F Final Cure Time/Temperature: 7 days @ 75°F Special Comments: Mix ratio is 4 quarts of water to one 60 lb bag of Cemtec Silatec PW. Ensure proper surface preparation guidelines are followed prior to installation.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.2 square inches/L.[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.2 square inches/L.[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] For all meters: X - Type of electronics 4 - AquaMaster 5 - WaterMaster Y - Tier of Electronics 1 - Standard Electronics 3 - Advanced Electronics 5 - Premium Electronics Z - Type of mounting 1 - Integral with transmitter 2 - Remote with transmitter (Sensor + Transmitter) 8 - Sensor only Type of bore and liner F - FEF/Full bore/Rubber liner R - FER/Reduced bore/Rubber liner [1] For all meters: X - Type of electronics 4 - AquaMaster 5 - WaterMaster Y - Tier of Electronics 1 - Standard Electronics 3 - Advanced Electronics 5 - Premium Electronics Z - Type of mounting 1 - Integral with transmitter 2 - Remote with transmitter (Sensor + Transmitter) 8 - Sensor only Type of bore and liner F - FEF/Full bore/Rubber liner R - FER/Reduced bore/Rubber liner [2] For all meters: X - Type of electronics 4 - AquaMaster 5 - WaterMaster 6 - ProcessMaster Y - Tier of Electronics 1 - Standard Electronics 2 - Enhanced Electronic 3 - Advanced Electronics 5 - Premium Electronics Z - Type of mounting 1 - Integral with transmitter 2 - Remote with transmitter (Sensor + Transmitter) 8 - Sensor only Type of bore and liner F - FEF/Full bore/Rubber liner[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Certified for product with the following densities and reaction speeds: 2 pounds per cubic foot (regular speed) 2 pounds per cubic foot (fast speed) 3 pounds per cubic foot (regular speed) 3 pounds per cubic foot (fast speed) 4 pounds per cubic foot (slow speed) 4 pounds per cubic foot (regular speed) 4 pounds per cubic foot (fast speed) 5 pounds per cubic foot (regular speed) 6 pounds per cubic foot (regular speed) Mix ratio is 1:1 (A:B) by volume or 8.1:6.9 (A:B) by weight. Minimum cure time is 60 minutes at ambient temperatures.[2] Certified for a maximum surface area to volume ratio of 0.375 square inches per liter.

[1] Certified for product with the following densities and reaction speeds: 2 pounds per cubic foot (regular speed) 2 pounds per cubic foot (fast speed) 3 pounds per cubic foot (regular speed) 3 pounds per cubic foot (fast speed) 4 pounds per cubic foot (slow speed) 4 pounds per cubic foot (regular speed) 4 pounds per cubic foot (fast speed) 5 pounds per cubic foot (regular speed) 6 pounds per cubic foot (regular speed) Mix ratio is 1:1 (A:B) by volume or 8.1:6.9 (A:B) by weight. Minimum cure time is 60 minutes at ambient temperatures.[2] Certified for a maximum surface area to volume ratio of 0.375 square inches per liter.

[1] Certified for a maximum surface area to volume ratio of 0.3 sq. in./L in pipe or 1% of a 20,000 gallon tank.[2] To obtain the proper mix, use at least a 3/4" length, but no more than 1/3 of a full stick, of product which has been cut with a knife. Product must be mixed for 60-90 seconds.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] (1) Hose length (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)

[1] (1) Hose length (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] (1) Hose length (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] (1) Hose length (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Configuration code breakdown: P – PushOn F – Fitting 50 - 1/2" 75 - 3/4" M – Manifold T – Tee C – Coupling E – Elbow X – Compatible with PEX pipe (as well as copper and CPVC) E – Bulk packaged (each)[2] PF50MT XE – 1/2" PushOnManifold Tee Code: P – PushOn F – Fitting 50 – 1/2 inch M – Manifold T – Tee X – Compatible with PEX pipe (as well as copper and CPVC). E – Bulk packaged (each)[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Colors: Red Number of Coats: 1 Maximum Field Use Dry Thickness (in mils): 4-500 Final Cure Time/Temperature: 15 minutes in water at a service temperature of 23C and greater. Special Comments: Mix ratio of A:B is 2:1 by volume. Product shall be preconditioned to at least 95F prior to mixing. Induction time is at least 10 minutes. Cure with air at a minimum of 95F for at least 2 hours. Following the air cure, product cure shall continue in water at a service temperature of 23C and greater for 15 minutes with a flow rate of 1 to 5 liters per minute prior to being placed into service.[2] Certified for Immediate Return to Service. 

[1] Certified for the following tank/component combinations: 3/4" fittings/fitting gaskets shall only be used with tanks greater than or equal to 2.8 gallons. 1" fittings/fitting gaskets shall only be used with tanks greater than or equal to 3 gallons. 1-1/4" and 1-1/2" fittings/fitting gaskets shall only be used with tanks greater than or equal to 4 gallons. 2" fittings/fitting gaskets shall only be used with tanks greater than or equal to 5 gallons. 3" fittings/fitting gaskets shall only be used with tanks greater than or equal to 95 gallons. Siphon tubes shall only be used with tanks greater than or equal to 5 gallons.[2] The trade names include product information represented by alphanumeric code, denoted as follows: XXXX, XXXXX, XXXXXX: Tank volume in gallons (2.8 gallons and greater) YY, YYY, YYYY diameter/width of tank in inches QQ: Customer code Z: Can be S (sump) or W (no sump) UU: Can be RT (Rectangular Tank), SQ (Square Tank), 2P (2in lid), 5N (5 in lid), or any other two alphabetical code (customer code) VVVVV: Part number #: Lid size in inches.

[1] Certified for the following mesh sizes: 8 x 20, 20 x 40.

[1] Certified for a maximum of 18.5 joints per liter.

[1] Certified for 1/8" thick flange insulating gaskets.

[1] Certified for the following tubing colors: Black Blue Green Natural Red White Yellow[2] Certified for the following sizes: 5/32 " - 1" 4 mm - 16 mm

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Certified also for metric sizes: 609 mm - 3500 mm.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Number of Coats: 1-2 Maximum Field Use Dry Film Thickness (in mils): 10 Final Cure Time and Temperature: 15 minutes at 350°F

[1] Number of Coats: 1-2 Maximum Field Use Dry Film Thickness (in mils): 10 Final Cure Time and Temperature: 15 minutes at 350°F

[1] Colors: Blue, white, yellow Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: None Final Cure: 20 minutes at 428°F[2] Colors: Red Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 220°C Special Comments: Preheat at 200°C - 230°C[3] Colors: Black, rust Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 428°F[4] Colors: Blue Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Recoat Cure Time and Temperature: 20 minutes at 220°C Special Comments: Pre-heat at 200°C - 230°C[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 428°F Special Comments: Self curing on 8 mm or heavier steel at 392°F - 428°F metal temperature.[6] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 35 Final Cure Time and Temperature: 455°F metal temperature and post cured for 10 minutes at 455°F Special Comments: Metal plates are pre-heated to 455°F and sprayed while hot. Plates are then post cured for 10 minutes at 455°F.[7] Colors: Red brown Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 428ºF

[6] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 35 Final Cure Time and Temperature: 455°F metal temperature and post cured for 10 minutes at 455°F Special Comments: Metal plates are pre-heated to 455°F and sprayed while hot. Plates are then post cured for 10 minutes at 455°F.[8] Number of Coats: 1 Maximum Field Use Dry Thickness: 10 mils Final Cure Time/Temperature: 10 minutes at 400°F[9] Colors: White, Grey Number of Coats: 1 Maximum field use dry film thickness (in mils): 10 Final cure time and temperature: 15 minutes at 350° F

[8] Number of Coats: 1 Maximum Field Use Dry Thickness: 10 mils Final Cure Time/Temperature: 10 minutes at 400°F[9] Colors: White, Grey Number of Coats: 1 Maximum field use dry film thickness (in mils): 10 Final cure time and temperature: 15 minutes at 350° F

[1] Colors: Blue, white, yellow Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: None Final Cure: 20 minutes at 428°F[2] Colors: Red Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 220°C Special Comments: Preheat at 200°C - 230°C[3] Colors: Black, rust Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 428°F[4] Colors: Blue Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Recoat Cure Time and Temperature: 20 minutes at 220°C Special Comments: Pre-heat at 200°C - 230°C[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 20 minutes at 428°F Special Comments: Self curing on 8 mm or heavier steel at 392°F - 428°F metal temperature.[6] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 35 Final Cure Time and Temperature: 455°F metal temperature and post cured for 10 minutes at 455°F Special Comments: Metal plates are pre-heated to 455°F and sprayed while hot. Plates are then post cured for 10 minutes at 455°F.[7] Colors: Red brown Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 428ºF

[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 15 minutes at 350°F Special Comments: Preheat substrate to 350° F.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 18 Final Cure Time and Temperature:: 1 minute at 475ºF Special Comments: Preheat panel to 650ºF before coating[3] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat to 350°F for 15 minutes.[4] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 15 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 350°F Special Comments: Preheat substrate to 350°F[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat part to 350°F for 20 minutes.

[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 15 minutes at 350°F Special Comments: Preheat substrate to 350° F.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 18 Final Cure Time and Temperature:: 1 minute at 475ºF Special Comments: Preheat panel to 650ºF before coating[3] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat to 350°F for 15 minutes.[4] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 15 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 350°F Special Comments: Preheat substrate to 350°F[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat part to 350°F for 20 minutes.

[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 15 minutes at 350°F Special Comments: Preheat substrate to 350° F.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 18 Final Cure Time and Temperature:: 1 minute at 475ºF Special Comments: Preheat panel to 650ºF before coating[3] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat to 350°F for 15 minutes.[4] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 15 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 350°F Special Comments: Preheat substrate to 350°F[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat part to 350°F for 20 minutes.

[1] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 20 Final Cure Time and Temperature: 15 minutes at 350°F Special Comments: Preheat substrate to 350° F.[2] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 18 Final Cure Time and Temperature:: 1 minute at 475ºF Special Comments: Preheat panel to 650ºF before coating[4] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 15 Maximum Thinner: None Final Cure Time and Temperature: 20 minutes at 350°F Special Comments: Preheat substrate to 350°F[5] Number of Coats: 1 Maximum Field Use Dry Film Thickness (in mils): 16 Special Comments: Preheat part before powder application to 350°F for 20 minutes. Post heat part to 350°F for 20 minutes.

[1] Certified for a maximum use level of 5,000 mg/L.

[1] Certification of this product has been performed to the health effects requirements of NSF/ANSI/CAN 61, which assesses the acceptability of potential extractants from the chemical feeder when used with the manufacturer's recommended use chemicals. Any modifications including the use of chemicals other than those recommended by the manufacturer and chemicals that are not compliant to NSF/ANSI/CAN 60 will void the NSF Certification for this feeder.[2] Horizon PCF-60 is Certified for a maximum 0.2% calcium hypochlorite solution added to drinking water to effect a maximum use level (MUL) of 10 ppm total chlorine, with a minimum of 47,500 gallons of water treated per day.[3] Horizon PTF-60, Horizon PTF-100, and Horizon PTF-250 are Certified for a maximum 0.11% trichloroisocyanurate solution added to drinking water to effect a maximum use level (MUL) of 10 ppm total chlorine, with a minimum of 18,000 gallons of water treated per day.

[1] Fittings can be welded or seamless, and come in the following configurations and corresponding sizes: - 3R Elbow: 90°, 60°, 45°, 30°. - 90° and 45°: 3/4" - 60" - 60° and 30°: 16"-60" - Long Radius Elbow: 90°C and 45°. All 1/2" - 60". - Long Radius Return: 1/2" - 24". - Short Radius Elbow: 1" – 24" - Short radius 180° Return: 1" – 24" - Long Radius Reducing Elbow: 2" x 1 1/2" – 24" x 12" - Tee: 1/2" - 60" - Cross: 1/2" - 60" - Reducing Tee: 1/2" x 1/2" x 3/8" – 60" x 60" x 30" - Concentric Reducer: 3/4" x 1/2" – 60" x 30" - Eccentric Reducer: 3/4" x 1/2" – 60" x 30" - Cap: 1/2" - 60" - Stub Ends: 1/2" - 60"[2] Forged and cast fittings can come in the following configurations and corresponding sizes: - Cross: 1/8" – 4" - Tee: 1/8" – 4" - 90° Elbow: 1/8" – 4" - 45° Elbow: 1/8" – 4" - Coupling: 1/8" – 4" - Half-coupling: 1/8" – 4" - Boss: 1/8" – 4" - Cap: 1/8" – 4" - Couplet: 1/8" – 4" - Threaded Street Elbows: 1/8" – 2" - Square head plug: 1/8" – 4" - Hex head plug: 1/8" – 4" - Round head plug: 1/8" – 4" - Hex head bushing: 1/8" – 4" - Flush bushing: 1/8" – 4"[3] Flanges come in the following configurations and range in 0.5-96" diameter: - Threaded - Slip-on - Socket weld - Lap joint - Blind - Welding neck

[1] Fittings can be welded or seamless, and come in the following configurations and corresponding sizes: - 3R Elbow: 90°, 60°, 45°, 30°. - 90° and 45°: 3/4" - 60" - 60° and 30°: 16"-60" - Long Radius Elbow: 90°C and 45°. All 1/2" - 60". - Long Radius Return: 1/2" - 24". - Short Radius Elbow: 1" – 24" - Short radius 180° Return: 1" – 24" - Long Radius Reducing Elbow: 2" x 1 1/2" – 24" x 12" - Tee: 1/2" - 60" - Cross: 1/2" - 60" - Reducing Tee: 1/2" x 1/2" x 3/8" – 60" x 60" x 30" - Concentric Reducer: 3/4" x 1/2" – 60" x 30" - Eccentric Reducer: 3/4" x 1/2" – 60" x 30" - Cap: 1/2" - 60" - Stub Ends: 1/2" - 60"[2] Forged and cast fittings can come in the following configurations and corresponding sizes: - Cross: 1/8" – 4" - Tee: 1/8" – 4" - 90° Elbow: 1/8" – 4" - 45° Elbow: 1/8" – 4" - Coupling: 1/8" – 4" - Half-coupling: 1/8" – 4" - Boss: 1/8" – 4" - Cap: 1/8" – 4" - Couplet: 1/8" – 4" - Threaded Street Elbows: 1/8" – 2" - Square head plug: 1/8" – 4" - Hex head plug: 1/8" – 4" - Round head plug: 1/8" – 4" - Hex head bushing: 1/8" – 4" - Flush bushing: 1/8" – 4"[3] Flanges come in the following configurations and range in 0.5-96" diameter: - Threaded - Slip-on - Socket weld - Lap joint - Blind - Welding neck

[1] All well screens 1.25" – 5" are Certified for a minimum daily flow of 450 L. All well screen 6" - 24" are Certified for minimum daily flow of 136,000 L.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] AVK Order Codes for XX: Ductile Iron Hydrants 10 - 2 x Hose + 1 x Pumper outlets, flanged with 4" ANSI B16.42 Monitor Flange drilled to ANSI B16.42 Class 150 20 - 1 x Hose + 2 x Pumper outlets, flanged. 23 - 1 x Hose + 2 x Pumper outlets, flanged with San Diego drilling 30 - 1 x Hose + 1 x Pumper outlet, with 6" NPT thread, UL 40 - 1 x Hose + 1 x Pumper outlet, flanged, UL 60 - 1 x Hose + 1 x Pumper outlet, with 6" NPT thread, UL and FM 70 - 1 x Hose + 1 x Pumper outlet, flanged, UL and FM 72 - EBMUD Hydrant 73 - 1 x Hose + 1 x Pumper outlet, flanged, UL and FM, San Diego drilling 74 - 1 x Hose + 1 x Pumper outlet, flanged, UL (FM removed) 75 - 1 x Hose + 1 x Pumper outlet, flanged, UL (FM removed, San Diego drilling) 76 - EBMUD Hydrant with San Diego drilling 87 - 2 x Threaded hose + 1 Threaded pumper outlet, UL and FM, San Diego Drilling 90 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM 91 - Three outlets (2 x 2 1/2" - 1 x 4”/4 1/2") 92 - 2 x Treaded hose + 1 Threaded pumper outlet, UL and FM 93 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM, San Diego drilling 94 - 2 x Hose + 1 x Pumper outlet, flanged, UL (FM removed) 95 - 2 x Hose + 1 x Pumper outlet, flanged, UL (FM removed, San Diego drilling) 96 - 2 x Hose + 1 x Pumper outlet, UL and FM, ANSI B16.1 Class 125 drilling Stainless Steel Hydrants 42 - Stainless steel 1 x Hose + 1 x pumper 43 - Stainless steel 1 x Hose + 1 x pumper, flanged with San Diego drilling 44 - Stainless steel 1 x Hose + 1 x pumper, flanged with 8 bolt drilling to ANSI B16.1, class 125 50 - 2 x Hose + 1 x Pumper outlet, flanged, UL and FM 52 - Stainless steel 2 x Hose + 1 x pumper. 53 - Stainless steel 2 x Hose + 1 x pumper, flanged with San Diego drilling 54 - Stainless steel 2 x Hose + 1 x pumper, flanged with 8 bolt drilling to ANSI B16.1, class 125 Certified hydrants use NBR valve discs and o-rings. Acceptable order codes for interior coating are 00, 01, 03, 08, 13, 29 and 53.[2] XX refers to non-wetted characteristics of the hydrant and may be any value.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[3] Valves 27-160-9176(Y)(XX)-05: Y - Bolting Material 1 - 316 bolting 3 - 304 bolting XX - Description of non-wetted options 29 – Valspar Red Oxide. Int. and ext. 34 – Valspar Red Oxide. Holiday free Int. and no holiday free ext. 35 – Valspar Red Oxide. Holiday free Int. and holiday free ext. 87 – Valspar Red Oxide. Int. and Polyurethan ext. 88 – Valspar Red Oxide. Holiday free Int. and Polyurethan ext. Where YXX can be 129, 134, 135, 187, 188, 329, 334, 335, 387, 388[4] Acceptable order codes for interior coating are 00, 01, 03, 08, 13, 29 and 53.[5] Certified for resilient seat to epoxy coated ductile iron seat. Certified for valves with no external actuation, lever and spring actuation, and lever and weight actuation.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Products also Certified for 100 mm - 1600 mm.[2] Certification is for all fittings configurations in any combination.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Products also Certified for 100 mm - 1600 mm.[3] All joint configurations.[4] Ductile Iron Pipe is lined with cement and then seal-coated with asphaltic coating.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] XX and YY refer to the size in inches.[2] Certified for use in distribution systems only.[3] 2500 series valves are certified with the following optional connection types: (A) - ALPHA (AX) - ALPHA XL (F) - Flanged (ANSI Class 125) (F2) - Flanged (ANSI Class 250 with raised face) (F3) - Flanged (PN16 with raised face) (F4) - Flanged (PN16 with flat face) (FB) - Flanged (ANSI Class 250 with flat face) (FX) - Flex Ring (MJ) - Mechanical Joint (PO) - Push-on (PVC) – PVC (RF) - Flanged (ANSI Class 150 with raised face) (S) - Threaded (NPT) (TM) - Tapping flanged by mechanical joint (TYT) – Tyton [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Trend and Pacer models are certified with the following optional end connections: - 4 inch mechanical joint - 6 inch mechanical joint - 6 inch mechanical joint for Dallas, Texas - 6 inch Class B mechanical joint - 8 inch mechanical joint - 6 inch flanged - 6 inch flanged with 2 inch NPT pipe plugs - 6 inch Tyton - 6 inch plain end - 6 inch PVC - 6 inch vertical entry - 6 inch vertical entry for Traverse City TVC5 - 6 inch ALPHA - 6 inch ALPHA XL[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[2] XX refers to size and may be 03, 04, 06, 08, 10 or 12.[3] Certified for standard and outside shaft models.[4] XX and YY refers to the size in inches.[5] Certified for use in distribution systems only.[6] 2500 and 3500 series valves are certified with the following optional connection types: (A) - ALPHA (AX) - ALPHA XL (F) - Flanged (ANSI Class 125) (F2) - Flanged (ANSI Class 250 with raised face) (F3) - Flanged (PN16 with raised face) (F4) - Flanged (PN16 with flat face) (FB) - Flanged (ANSI Class 250 with flat face) (FX) - Flex Ring (MJ) - Mechanical Joint (PO) - Push-on (PVC) – PVC (RF) - Flanged (ANSI Class 150 with raised face) (S) - Threaded (NPT) (TM) - Tapping flanged by mechanical joint (TYT) – Tyton[7] Certified for standard and outside shaft models.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Certification does not include any connection gaskets.[2] All model hydrants are certified with the following optional connection types: - ALPHA - ALPHA XL - Flanged - Flanged (ANSI Class 250 with raised face) - Flanged (ANSI Class 250 with flat face) - Mechanical Joint - Mechanical Joint Plain End - Push-on - Tyton[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[3] XX refers to the size of the valve in inches and may be 03, 04, 06, 08, 10, 12, 14, or 16.[4] Certified for use in distribution systems only.[5] 2100 series check valves are certified with the following optional connection types: - Flanged - Mechanical Joint - Mechanical Joint Plain End[6] XX and YY refer to the size in inches.[7] 2500 and 3500 series valves are certified with the following optional connection types: (A) - ALPHA (AX) - ALPHA XL (F) - Flanged (ANSI Class 125) (F2) - Flanged (ANSI Class 250 with raised face) (F3) - Flanged (PN16 with raised face) (F4) - Flanged (PN16 with flat face) (FB) - Flanged (ANSI Class 250 with flat face) (FX) - Flex Ring (MJ) - Mechanical Joint (PO) - Push-on (PVC) – PVC (RF) - Flanged (ANSI Class 150 with raised face) (S) - Threaded (NPT) (TM) - Tapping flanged by mechanical joint (TYT) – Tyton[8] The Swing Check Valve - Series 52 SC may use a "lever and weight" or "lever and spring" option.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Only products bearing the NSF mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Only products bearing the NSF mark on the product, product packaging, and/or documentation shipped with the product are Certified.[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Certified for a minimum daily flow of 116,000 L. Certification includes only the open lineshaft configuration.[2] AA - Size of pump in inches (6" - 42") BB - Pump model (D, G, H, I, J, K, L, M, N, W, X, Y, Z, EH, HH) CC - Impeller design (C) DD - Number of stages (1-48) ["C" impeller design indicates "enclosed"][G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Certified for the following configurations: slip on flange, lap joint flange, socket welding flange, orifice flange, threaded flange, blind flange, welding neck flange, and line blanks (spectacle blind, paddle blind, paddle spacers).[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] This product is Certified for a maximum use level of 250 mg/L.[2] The carbon source is bituminous coal. Physical state: Liquid[3] Certified for the following mesh sizes: -200 and -325.

[1] X - Valve pattern Blank - Straight N - N pattern Z - Z pattern YY - Backflow shutoff designation where 2 per units may be mixed like NRS x PIV BFG - Butterfly valve DNRS - Domestic non-rising stem gate DOSY - Domestic outside stem and yoke gate DPIV - Domestic post indicator gate NRS - Non-rising stem gate OSY - Outside stem and yoke gate PIV - Post indicator gate QT - Quarter turn ball valve ZZ - Inlet and outlet connections Blank - Flange by flange FxG - Flange by groove GxF - Groove by flange GxG - Groove by groove TT - Strainer options Blank - No strainer S - 77F-DI-FDA-125 strainer S - SS Stainless Strainer 8000F[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[2] The following accessories are use with the globe or angle pattern control valve tubing and fittings: Model LFFBV-3C-M1 Ball Valves (1/4" - 1") Figure 60 Flow Clean Strainer (1/4" - 1") 263SS Pressure reducing pilot Mechanical check option Anti-Cavitation trim option[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] May consist of any of below: (X) - Inlet connection GRV - Grooved end CIPS - Cast iron pipe size FLG - Flanged end THR - Thread (Y) - Outlet connection GRV - Grooved end CIPS - Cast iron pipe size FLG - Flanged end THR - Thread[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] May consist of any of below: (X) Inlet connection CIPS - Cast Iron Pipe Size FLG - Flanged End GRV - Grooved end THR - Thread (Y) Outlet connection CIPS - Cast Iron Pipe Size FLG - Flanged End GRV - Grooved end THR - Thread[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] YY LBV - Supplied without shut-off valves Blank - Supplied with shut-off valves ZZ - Any Combination of the following: Blank - Standard unit BC - Brass Cap CT (or C&T) - Cap and teather FP - Gear Operated Ball Valve LH - Locking Handles S - Strainer (LF777SI) SH - Stainless handles Z3 - Stainless handles and nuts Z4 - Non-removable handles Z5 - Special dipped test co*ck adapter[2] Products may include one or more of the following prefixes or suffixes: S - Lead Free Strainer LF (as prefix) - Lead free LF (as suffix) - Less fitting QT - Quarter turn ball valve Options for non-wetted: C & T - Cap and tether test co*ck covers LH - Locking handled ball valves SH - Stainless handled ball valves[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Naming Convention: 575-A-B-C-D-E-F-G A - Sensing Port S - Nylon M - 316SS B - Input/Output (all) B - (12-40VDC / 4-20mA) C - Pressure Ranges (all listed) [0006 (0-6psi, up to 13.8ft water) to 0300 (0-300psi, up to 690ft water)] D - Electrical Connection N - Polyurethane with nut R - Polyurethane with nut and support bracket C - Polyurethane with conduit adapter E - Diaphragm Material L - 316SS F - Fill Fluid M - Mineral Oil G - X459 H - Cable Length [005 to 700 (range of feet of cable, custom)][G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. 

[1] Certified Pressurized Water Storage Tanks may be sold with a union which is designated by the inclusion of a "U" in the model number.[2] Optional suffixes UG or TK[3] Optional suffixes OC, HG, TK, H or HTC[4] Optional suffixes PS, UG, TK, or OC[5] Optional suffix WT[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.